Description
DESCRIPTION
You can operate this programmable ring roller on its back for horizontal bending of large radii or in the vertical position for smaller diameters.
- This angle ring roller runs on 220-volt 3-phase power.
- Bend up to 4” round tubing with a .083 wall.
- 3 rolls driven by 5 HP motor with direct-drive transmission.
- Industrial-grade hydraulic cylinder system lets you adjust the positioning of top forming roll with the programmable control station.
- Digital readout on top roll position makes each bend easily repeatable, key for those multiple-piece production runs.
- Built from heavy steel plate and mounted on a fully-welded steel housing to sustain machine’s strength.
SPECIFICATIONS
| Item Number | R-H55 |
|---|---|
| Country of Manufacture | Portugal |
| Roll Adjustment | Hydraulic |
| Pipe Capacity | Size: 2.5″ (sch. 40) / Min. Dia.: 40″ |
| Round Tube Capacity | Size: 3″ (.095″) / Min. Dia.: 72″ |
| Square Tube Capacity | Size: 2.75″ (.083″) / Min. Dia.: 54″ |
| Solid Round Capacity | Size: 2″ / Min. Dia. 28″ |
| Flat Bar Easy Way | Size: 5″ (.75″) / Min. Dia. 28″ |
| Flat Bar Hard Way | Size: 3.5″ (.675″)/ Min. Dia.: 32″ |
| Angle Iron Capacity | Size: 3″ (.250″)/ Min. Dia.: 36″ |
| Shaft Diameter | 2.165″ |
| Shaft Center Distance Lower Rolls | 11.875″ |
| Lower Roll Dia. | 6.693″ |
| Pinch | Single |
| Digital Readout | Yes |
| Power | 220V / 3-phase |
| Shipping Weight | 1320lbs |
| Material Type | All Specs based on 60,000 PSI (42 Kg/mm 2) Tensile Strength – Mild Steel. |
| Shipping Dimensions (Inches) | 60x44x77 |
* specifications subject to change without notice.
California Proposition 65