Hydraulic Roll Bender R-H150

$104,195.00

DESCRIPTION

The programmable double-pinch design of this tube roller lets you make repeatable bends and complex parts with ease.

  • 3 driven rolls run on 220-volt 3-phase power.
  • Rolls up to 6.25” round tube and 4.75” x 4.75” x 0.5” angle iron.
  • Hydraulic cylinders connected to 2 bottom rolls accomplish pre- and post-bending to cut down on material waste.
  • Digital readout displays positions of bottom rolls.
  • You can program stops for each shaft for precise results.
  • Movable operator podium includes control buttons and attached foot pedals to specify roll direction.
  • Operate this ring roller in vertical position or lay it on its back, in horizontal position, for large radius jobs and long material sections.
  • The machine’s heavy steel plate frame, bolted and welded together, minimizes flex and ensures accuracy over years of profitable production.

SPECIFICATIONS

Item Number R-H150
Roll Adjustment Hydraulic
Pipe Capacity Size: 5.5″ (sch. 40) / Min. Dia.:73″
Round Tube Capacity Size: 6.250″ (.125″) / Min. Dia.: 118″
Square Tube Capacity Size: 4″ (.196″) / Min. Dia.: 118″
Solid Round Capacity Size: 3.375″ / Min. Dia.: 36″
Flat Bar Easy Way Size: 7.875″ (2″) / Min. Dia.: 40″
Flat Bar Hard Way Size: 5.5″ (1.125″) / Min. Dia.: 118″
Angle Iron Capacity Size: 4.75″ (.5″) / Min. Dia.: 60″
Shaft Diameter 4.724″
Lower Roll Dia. 15.354″
Pinch Double
Digital Readout Yes
Power 220V / 3-phase
Shipping Weight 10400lbs
Material Type All Specs based on 60,000 PSI (42 Kg/mm 2) Tensile Strength – Mild Steel.
Shipping Dimensions (Inches)  58x79x81

* specifications subject to change without notice.

California Proposition 65

California Proposition 65

Out of stock

SKU: BHRBRH150082820 Categories: , ,

Description

DESCRIPTION

The programmable double-pinch design of this tube roller lets you make repeatable bends and complex parts with ease.

  • 3 driven rolls run on 220-volt 3-phase power.
  • Rolls up to 6.25” round tube and 4.75” x 4.75” x 0.5” angle iron.
  • Hydraulic cylinders connected to 2 bottom rolls accomplish pre- and post-bending to cut down on material waste.
  • Digital readout displays positions of bottom rolls.
  • You can program stops for each shaft for precise results.
  • Movable operator podium includes control buttons and attached foot pedals to specify roll direction.
  • Operate this ring roller in vertical position or lay it on its back, in horizontal position, for large radius jobs and long material sections.
  • The machine’s heavy steel plate frame, bolted and welded together, minimizes flex and ensures accuracy over years of profitable production.

SPECIFICATIONS

Item Number R-H150
Roll Adjustment Hydraulic
Pipe Capacity Size: 5.5″ (sch. 40) / Min. Dia.:73″
Round Tube Capacity Size: 6.250″ (.125″) / Min. Dia.: 118″
Square Tube Capacity Size: 4″ (.196″) / Min. Dia.: 118″
Solid Round Capacity Size: 3.375″ / Min. Dia.: 36″
Flat Bar Easy Way Size: 7.875″ (2″) / Min. Dia.: 40″
Flat Bar Hard Way Size: 5.5″ (1.125″) / Min. Dia.: 118″
Angle Iron Capacity Size: 4.75″ (.5″) / Min. Dia.: 60″
Shaft Diameter 4.724″
Lower Roll Dia. 15.354″
Pinch Double
Digital Readout Yes
Power 220V / 3-phase
Shipping Weight 10400lbs
Material Type All Specs based on 60,000 PSI (42 Kg/mm 2) Tensile Strength – Mild Steel.
Shipping Dimensions (Inches)  58x79x81

* specifications subject to change without notice.
California Proposition 65

California Proposition 65